Rouden Pipetek is one of the largest Naylor Clay stockists in the South East. You can purchase a wide variety of Clay Drainage and Concrete Drainage Pipes & Fittings directly. This can be done from our 4-acre yard in Peas Pottage, West Sussex, Petersfield in Hampshire or our depot in Maidstone, Kent.
Concrete and Clay Drainage Pipes and Fittings are suitable for use in many different environments and have excellent benefits. We supply a wide range, including Densleeve, in diameters DN100, 150, 225 and 300mm.
Have your stock delivered when and where you need by our fleet of vans. Our clay range is delivered in convenient packs with optional mechanical offloading equipment on the delivery vehicle.
Please Get in Touch with us to discuss your requirements.
Structural Performance – Densleeve pipes can usually be laid directly on a hand trimmed natural trench bottom with selected, excavated materials (Class D Bedding) used as backfill.
Clayware – Vitrified clay plain-end pipe and fittings, manufactured in accordance with the requirements of BS EN295-1. The standard lengths of pipes are convenient for handling and laying, and allow for flexible joints at sufficiently frequent intervals to enable the pipeline to withstand settlement or other ground movement installation.
Bedding economy – Densleeve pipes can often be laid on the natural, trimmed trench bottom or where not possible on a 50mm bed of inexpensive granular material such as recycled aggregates. As dug material can be used for the backfill, all resulting in significant savings in granular bedding materials.
Strength – Vitrified clay pipes and fittings are rigid and do not distort under loading. Their high inherent strength ensures stability even at extreme depths of cover.
Durability – The Densleeve system is extremely durable. For design purposes, a vitrified clay pipeline can be considered to have unlimited life.
Easy cutting – Where shorter lengths of pipe are required, pipes may be easily cut on site.
Quick installation – Pipe jointing is a straightforward manual push fit operation. Testing and backfilling can start immediately.
Flexibility – The flexile joints ensure the pipeline will accommodate minor settlement and ground movement without failure.
Chemical and Temperature Resistance – The Densleeve system has good corrosion resistance and can accommodate controlled discharges of up to 60-70 degrees.
Pipe Lengths – Naylor Pipes are supplied in easy to handle lengths.
Sleeve Couplings – Manufactured in high impact polypropylene with elastometric seals providing watertight, flexible mechanical joint assemblies, complying with BS EN295-1 : System G.
Water Jetting – The Densleeve system, when installed correctly in accordance with the Naylor Sitework Instructions booklet is guaranteed for the lifetime of the system against penetration of the pipe wall caused by high pressure water jetting when operated within the following maximum parameters.
At Rouden Pipetek Ltd, we are renowned for our excellent customer service. Being part of the industry for so many years and having grown organically over this time means no job is too big or too small for us. Over the years we have been supplying total solutions in water management systems, we have developed an enviable reputation of being the UK’s number one South East distributor in our market… Find Out More
